Categories

+ Bolts & Studs
+ Nuts
+ Pins
+ Rigging & Tools
+ Rivets
+ Screws
+ Washers & Retaining Rings
+ Welds
+ Anchors

Narrow by:

DINx
Previous
1 2 3 4 5 6 7 8 9 10
Next
Accessories for the installation of gypsum plasterboard Nails DIN 18182-4-1987
Accessories for the installation of gypsum plasterboard Nails
Adjusting Rings DIN 705-2007
Adjusting Rings
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃ DIN 65438-1993
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy DIN 65517-2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy
Agricultural machinery - Flat countersunk square neck bolts with short square DIN 11015-1995
Agricultural machinery - Flat countersunk square neck bolts with short square
All-Metal Prevailing Torque Type Hexagon Nuts DIN 980-1987
All-Metal Prevailing Torque Type Hexagon Nuts

4

Ball knobs [Type C] DIN 319-1978
Ball knobs [Type C]
Belt screws DIN 15237-1980
Belt screws
Bolted Connections With Reduced Shank Hexagon Nuts DIN 2510-5-1971
Bolted Connections With Reduced Shank Hexagon Nuts
Bolted Connections With Reduced Shank; Extension Sleeves DIN 2510-7-1971
Bolted Connections With Reduced Shank; Extension Sleeves
Bolts and Screws for T-slots DIN 787-2005
Bolts and Screws for T-slots
Brake and clutch lining rivets DIN 7338(A)-1993
Brake and clutch lining rivets
Brake And Clutch Lining Rivets, Form A DIN 7338(A)-2011
Brake And Clutch Lining Rivets, Form A
Brake and clutch lining rivets,semitubular rivet DIN 7338(B)-1993
Brake and clutch lining rivets,semitubular rivet

1

Brake And Clutch Lining Rivets,Semitubular Rivet DIN 7338(B)-2011
Brake And Clutch Lining Rivets,Semitubular Rivet

1

Brake and clutch lining rivets,tubular rivet DIN 7338(C)-1993
Brake and clutch lining rivets,tubular rivet

1

Brake And Clutch Lining Rivets,Tubular Rivet DIN 7338(C)-2011
Brake And Clutch Lining Rivets,Tubular Rivet

1

Break manderl blind rivets ,countersunk head DIN 7337-1991
Break manderl blind rivets ,countersunk head

3

Break manderl blind rivets ,flat head DIN 7337-1991
Break manderl blind rivets ,flat head

2

Cap nuts for use with bolts with waisted shank DIN 2510-6-1974
Cap nuts for use with bolts with waisted shank
Chamfered Hexagon Thin Nuts—Product Grades A and B DIN 439(-2)-1987
Chamfered Hexagon Thin Nuts—Product Grades A and B

1

Chamfered Hexagon Thin Nuts—Product Grades A and B DIN EN ISO 4035-2013
Chamfered Hexagon Thin Nuts—Product Grades A and B

1

Chamfered Plain Washers For Use In Structural Steelwork DIN 34820-2004
Chamfered Plain Washers For Use In Structural Steelwork

1

Cheese head screws with 12 point socket DIN 34821-2005
Cheese head screws with 12 point socket
Cheese head screws with flange with 12 point socket DIN 34822-2005
Cheese head screws with flange with 12 point socket
Clevis Pins with Head DIN 1444-1974
Clevis Pins with Head
Clevis pins with head and stud end DIN 1445-1977
Clevis pins with head and stud end
Clevis Pins with Head and Threaded Portion DIN 1445-2011
Clevis Pins with Head and Threaded Portion
Clevis Pins With Small Head; Finish M DIN 1434-1977
Clevis Pins With Small Head; Finish M
Clip bolts DIN 6378-1974
Clip bolts
Closed insert nuts for plastics mouldings-hex with shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-hex with shoulder
Closed insert nuts for plastics mouldings-hex without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-hex without shoulder
Closed insert nuts for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-round without shoulder
Closed insert nuts for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-round without shoulder
Closed insert nuts with disc for plastics mouldings-hex with shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-hex with shoulder
Closed insert nuts with disc for plastics mouldings-hex without shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-hex without shoulder
Closed insert nuts with disc for plastics mouldings-round with shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-round with shoulder
Closed insert nuts with disc for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-round without shoulder
Components for liftig,towing,lashing—Shackle,bow-Stainless steels DIN 82103-1987
Components for liftig,towing,lashing—Shackle,bow-Stainless steels
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels DIN 82101-1987
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
Compressed Air Equipment for Rail Vehicles; Locking Screws with Collar and Vent DIN 5586-1989
Compressed Air Equipment for Rail Vehicles; Locking Screws with Collar and Vent
Conical Nut(F) DIN 74361-2-F-2008
Conical Nut(F)
Conical nut(F) DIN 74361-2-F-1982
Conical nut(F)
Conical Spring Washers for Bolted Connections DIN 6796-2009
Conical Spring Washers for Bolted Connections

4

Conical spring washers for screw and washer assemblies DIN 6908-1990
Conical spring washers for screw and washer assemblies

2

Conical Spring Washers For Screw And Washer Assemblies DIN 6908-1995
Conical Spring Washers For Screw And Washer Assemblies

2

Conical Spring Washers- Series B DIN 2093-2013
Conical Spring Washers- Series B

2

Conincal Spring Washers Bor Bolt/Nut Assemblies DIN 6796-1987
Conincal Spring Washers Bor Bolt/Nut Assemblies

4

Countersunk bolts with double nip for Railway vehicles - Class C DIN 25195-2003
Countersunk bolts with double nip for Railway vehicles - Class C
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 DIN EN ISO 7046-1-2011
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8

2

Countersunk head double nibs bolts for agricultural machinery DIN 11014-1968
Countersunk head double nibs bolts for agricultural machinery
Countersunk Head Grooved Pins DIN 1477-1978
Countersunk Head Grooved Pins
Countersunk head rivets (with nominal diameters from 1 to 8 mm) DIN 661-1993
Countersunk head rivets (with nominal diameters from 1 to 8 mm)
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm) DIN 661-2011
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm)
Crooved Pins, Half Length Taper Grooved DIN 1472
Crooved Pins, Half Length Taper Grooved
Crooved Pins, Half-Length Taper Grooved DIN EN ISO 8745-1998
Crooved Pins, Half-Length Taper Grooved
Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer DIN 6900-1-1990
Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer
Cross recessed countersunk head  screws DIN 965-1990
Cross recessed countersunk head screws

2

Cross recessed countersunk head drilling screws with tapping screw thread DIN 7504P-1982
Cross recessed countersunk head drilling screws with tapping screw thread

2

Cross Recessed Countersunk Head Drilling Screws With Tapping Screw Thread DIN EN ISO 15482-2000
Cross Recessed Countersunk Head Drilling Screws With Tapping Screw Thread

2

Previous
1 2 3 4 5 6 7 8 9 10
Next