简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:inch

Double End Studs

IFI 136 - 2006

Display drawing:

美标IFI 136 - 2006 IFI136 136IFI Double End Studs
Thread Size
1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2
PP
ds 2 Type max
min
3Type max
min
b min （L≤6 ）
（L＞6）
L1 max （L≤6 ）
（L＞6）
20 18 16 14 13 12 11 10 9 8 7 7 6 6
0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500 0.8750 1.0000 1.1250 1.2500 1.3750 1.5000
0.2127 0.2712 0.3287 0.3850 0.4435 0.5016 0.5589 0.6773 0.7946 0.9100 1.0228 1.1476 1.2563 1.3812
0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500 0.8750 1.0000 1.1250 1.2500 1.3750 1.5000
0.2408 0.3026 0.3643 0.4258 0.4876 0.5495 0.6113 0.7353 0.8592 0.9830 1.1064 1.2314 1.3544 1.4794
0.750 0.875 1.000 1.125 1.250 1.375 1.500 1.75 2.000 2.250 2.500 2.750 3.000 3.250
1.000 1.125 1.250 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 3.000 3.250 3.500
0.875 1.031 1.188 1.344 1.500 1.656 1.812 2.125 2.438 2.750 3.062 3.375 3.688 4.000
1.125 1.281 1.438 1.594 1.750 1.906 2.062 2.375 2.688 3.000 3.312 3.625 3.928 4.250
①,Type 1 studs shall have an unfinished body with no specified body diameter tolerances；
Type 2 studs shall have a maximum body diameter equal to basic major diameter of the thread, and a minimum body diameter equal to the rolled thread blank size.
Type 3 studs shall have a maximum body diameter equal to basic major diameter of the thread, and a minimum body diameter equal to the specified minimum major diameter of the thread.
Type 4 studs shall have body diameter tolerances as specified by the purchaser (milled or ground body).
②,When flat and chamfered, the end shall be chamfered from a diameter approximately 0.016 in. below the minor diameter of the thread to produce a length of chamfer or incomplete thread not to exceed two times the thread pitch.

Suppliers

Best price if from GlobalFastener.com.
Ningbo Taidahezhong Fastener Manufacture Co., Ltd.

  • Mr.Shen

  • +86-18667868777

  • +86-574-89088921

  • Material: 35CrMo/30CrMo, AISI4140, AISI4145, AISI410/S41000, Cr-Mo-V, AISI1045, AISI304/S30400 AISI316/S31600; Grades: ASTM A193/A193M Gr.B7, B7M, B16, B8, B8A, B8M, B8MA, B6, B8-2, B8M-2, ASMESA-320/SA-320M Gr.L7, L7M, B8, B8A, B8M, B8MA, B8-2, B8M-2, 12.9, 10.9, 8.8, 10, 8.
Contact us via Email

Similar Standards

1 Studs With A Length Of Engagement Equal To About 1d [DIN]
DIN 938 - 1995 		Studs With A Length Of Engagement Equal To About 1d

View Suppliers
2 Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B) [DIN]
DIN 949 (-2) - 1995 		Studs with Metric Interference Thread MFS - Part 2: Lengths of Engagement ≈ 2.5 d (Type B)

View Suppliers
3 Studs - Metal End ≈ 1 d [DIN]
DIN 938 - 2012 		Studs - Metal End ≈ 1 d

View Suppliers
4 Studs with Metric Interference Thread MFS - Part 1: Lengths of Engagement ≈ 2 d (Type A) [DIN]
DIN 949-1 - 1995 		Studs with Metric Interference Thread MFS - Part 1: Lengths of Engagement ≈ 2 d (Type A)

View Suppliers
5 Studs - Metal end ≈ 2.5d [DIN]
DIN 940 - 1995 		Studs - Metal end ≈ 2.5d

View Suppliers
6 Studs with a length of engagement equal to about 2.5d [DIN]
DIN 940 - 1983 		Studs with a length of engagement equal to about 2.5d

View Suppliers
7 Studs - Metal end ≈ 1,25 d [DIN]
DIN 939 - 1995 		Studs - Metal end ≈ 1,25 d

View Suppliers
8 Studs with a length of engagement equal to about 2.5d [DIN]
DIN 940 - 2010 		Studs with a length of engagement equal to about 2.5d

View Suppliers
9 Double End Studs For Pipe Flange Connection [GB]
GB /T 9125 - 2010 		Double End Studs For Pipe Flange Connection

View Suppliers
10 Double End Studs - Product Grade B For Pipe Flange Connection [GB]
GB /T 9125 - 2010 		Double End Studs - Product Grade B For Pipe Flange Connection

View Suppliers
11 Double End Studs(Clamping Type) - Product Grade C [GB]
GB 953 - 1988 		Double End Studs(Clamping Type) - Product Grade C

View Suppliers
12 Double End Studs-bm=2d [GB]
GB 900 - 1988 		Double End Studs-bm=2d

View Suppliers
13 Double End Studs (Clamping Type)-Product Grade B [GB]
GB 901 - 1988 		Double End Studs (Clamping Type)-Product Grade B

View Suppliers
14 Double End Studs For Pipe Flange Connection - PN designated [GB]
GB /T 9125.1 - 2020 		Double End Studs For Pipe Flange Connection - PN designated

View Suppliers
15 Double End Studs b1=1.5d [GB]
GB 899 - 1988 		Double End Studs b1=1.5d

View Suppliers
16 Studs [JIS]
JIS B 1173 - 2010 		Studs

View Suppliers
17 Double End Studs-bm=1.25d [GB]
GB 898 - 1988 		Double End Studs-bm=1.25d

View Suppliers
18 Double studs [JIS]
JIS B 1173 - 1995 		Double studs

View Suppliers
19 Double End Studs For Pipe Flange Connection [GB]
GB /T 9125 - 2003 		Double End Studs For Pipe Flange Connection

View Suppliers
20 Double End Studs-bm=1d [GB]
GB 897 - 1988 		Double End Studs-bm=1d

View Suppliers
21 Connections With Double End Studs - Type HP [DIN]
DIN 2510-4 (HP) - 1971 		Connections With Double End Studs - Type HP
22 Metric Clamping-Type Studs [Table 2] (ASTM F568, F738M, F468M) [ASME]
ASME B 18.31.1M - 2008 (R2016) 		Metric Clamping-Type Studs [Table 2] (ASTM F568, F738M, F468M)
23 Stude Threaded End ≈2d [DIN]
DIN 835 - 1972 		Stude Threaded End ≈2d
24 Connections With Double End Studs - Type GP [DIN]
DIN 2510-4 (GP) - 1971 		Connections With Double End Studs - Type GP
25 Connections With Double End Studs - Type GS [DIN]
DIN 2510-4 (GS) - 1971 		Connections With Double End Studs - Type GS
26 Metric Double End Studs [IFI]
IFI 528 - 1999 		Metric Double End Studs
27 Connections With Double End Studs - Type GR [DIN]
DIN 2510-4 (GR) - 1971 		Connections With Double End Studs - Type GR
28 Dimensions for Clamping Type Studs（A193 / A320 / A437 / A453 / A540 / A1014） (Inch Series) [Table 2] [ASME]
ASME B 18.31.2 - 2014 		Dimensions for Clamping Type Studs（A193 / A320 / A437 / A453 / A540 / A1014） (Inch Series) [Table 2]
29 Metric Tap-End Studs (1.50 Engagement) [Table 3] (ASTM F568, F738M, F468M) [ASME]
ASME B 18.31.1M - 2008 (R2016) 		Metric Tap-End Studs (1.50 Engagement) [Table 3] (ASTM F568, F738M, F468M)
30 Connections With Double End Studs - Type HR [DIN]
DIN 2510-4 (HR) - 1971 		Connections With Double End Studs - Type HR
31 Connections With Double End Studs - Type GQ [DIN]
DIN 2510-4 (GQ) - 1971 		Connections With Double End Studs - Type GQ
32 Studs For Use With T-Nuts ( Long b1 ) [DIN]
DIN 6379 - 2003 		Studs For Use With T-Nuts ( Long b1 )
33 Double end studs [DIN]
DIN 2509 - 1986 		Double end studs
34 Clamping type studs [ASME]
ASME B 18.31.2 - 2008 		Clamping type studs
35 Connections With Double End Studs - Type HS [DIN]
DIN 2510-4 (HS) - 1971 		Connections With Double End Studs - Type HS
36 Connections With Waisted Stud - Type KU [DIN]
DIN 2510-3 (KU) - 1971 		Connections With Waisted Stud - Type KU
37 Studs For Use With T-Nuts [DIN]
DIN 6379 - 2003 		Studs For Use With T-Nuts
38 Studs - Metal End ≈ 2 d [DIN]
DIN 835 - 2010 		Studs - Metal End ≈ 2 d
39 Dimensions for Tap-End Studs (1.5d Engagement) (Inch Series)（A193 / A320 / A437 / A453 / A540 / A1014）[Table 3] [ASME]
ASME B 18.31.2 - 2014 		Dimensions for Tap-End Studs (1.5d Engagement) (Inch Series)（A193 / A320 / A437 / A453 / A540 / A1014）[Table 3]
40 Connections With Double End Studs - Type HQ [DIN]
DIN 2510-4 (HQ) - 1971 		Connections With Double End Studs - Type HQ
41 Connections With Waisted Stud - Type L [DIN]
DIN 2510-3 (L) - 1971 		Connections With Waisted Stud - Type L
42 Connections With Waisted Stud - Type ZU [DIN]
DIN 2510-3 (ZU) - 1971 		Connections With Waisted Stud - Type ZU
43 Double End Studs [DIN]
DIN 2509 - 2016 		Double End Studs
44 Stude Threaded End ≈2d [DIN]
DIN 835 - 1995 		Stude Threaded End ≈2d
45 Special Foundation Bolts [DIN]
DIN 797 - 1970 		Special Foundation Bolts
46 Connections With Waisted Stud - Type Z [DIN]
DIN 2510-3 (Z) - 1971 		Connections With Waisted Stud - Type Z
47 Connections With Waisted Stud - Type K [DIN]
DIN 2510-3 (K) - 1971 		Connections With Waisted Stud - Type K
48 double end studs (ASTM A354 / A449 / F593 / SAE J429) [ASME]
ASME B 18.31.2 - 2008 		double end studs (ASTM A354 / A449 / F593 / SAE J429)
49 Special Foundation Bolts [DIN]
DIN 797 - 2009 		Special Foundation Bolts
50 Long Metal End Studs - ISO Metric Coarse Thread [UNI]
UNI 5914 		Long Metal End Studs - ISO Metric Coarse Thread
51 Connections With Waisted Stud - Type L [GB]
GB /T 13807.2 (L) - 2008 		Connections With Waisted Stud - Type L
52 Medium End Studs (b1=1.5d)-ISO Metric Coarse Thread - Product Grade A [UNI]
UNI 5911 - 1993 		Medium End Studs (b1=1.5d)-ISO Metric Coarse Thread - Product Grade A
53 Screwd Studs -B.S.W.Thread [Table 6] [BS]
BS 2693-1 - 1956 		Screwd Studs -B.S.W.Thread [Table 6]
54 Connections With Waisted Stud - Type S [GB]
GB /T 13807.2 (S) - 2008 		Connections With Waisted Stud - Type S
55 Connections With Waisted Stud - Type A [GB]
GB /T 13807.2 (A) - 2008 		Connections With Waisted Stud - Type A
56 Screwd Studs - B.S.F. Thread [Table 5] [BS]
BS 2693-1 - 1956 		Screwd Studs - B.S.F. Thread [Table 5]
57 Connections With Waisted Stud - Type AD [GB]
GB /T 13807.2 (AD) - 2008 		Connections With Waisted Stud - Type AD
58 Set of Anchor Bolt with Rolled Threads for Structures - ABR [JIS]
JIS B 1220 (ABR) - 2015 		Set of Anchor Bolt with Rolled Threads for Structures - ABR
59 Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud [JIS]
JIS A 5542 (A3) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud
60 Double End Studs, bm=1d [UNI]
UNI 5909 - 1993 		Double End Studs, bm=1d
61 Screwd Studs - UNC Thread [Table 4] [BS]
BS 2693-1 - 1956 		Screwd Studs - UNC Thread [Table 4]
62 Double End Studs, bm=1d [UNI]
UNI 5909 - 1966 		Double End Studs, bm=1d
63 Screwd Studs - B.A. Thread [Table 7] [BS]
BS 2693-1 - 1956 		Screwd Studs - B.A. Thread [Table 7]
64 Set of Anchor Bolt with Rolled Threads for Structures [JIS]
JIS B 1220 - 2010 		Set of Anchor Bolt with Rolled Threads for Structures
65 Connections With Waisted Stud - Type SD [GB]
GB /T 13807.2 (SD) - 2008 		Connections With Waisted Stud - Type SD
66 Double-end Dtud Bolt, Carbon steel and hot-clip zinc coated carbon steel [JIS]
JIS A 5540 - 2008 		Double-end Dtud Bolt, Carbon steel and hot-clip zinc coated carbon steel
67 Connections With Waisted Stud-Studs - Type S [GB]
GB /T 13807.2 - 1992 		Connections With Waisted Stud-Studs - Type S
68 Medium End Studs -ISO Metric Coarse Thread - Product Grade A [UNI]
UNI 5911 - 1966 		Medium End Studs -ISO Metric Coarse Thread - Product Grade A
69 Studs - Product A And B (b1=1d, 1.25d 或 2d) [NF]
NF E 25-135 - 1986 		Studs - Product A And B (b1=1d, 1.25d 或 2d)
70 Studs - Product A And B b1=1.5d [NF]
NF E 25-135 - 1986 		Studs - Product A And B b1=1.5d
71 Screwd Studs - UNF Thread [Table 3] [BS]
BS 2693-1 - 1956 		Screwd Studs - UNF Thread [Table 3]
72 Set of Anchor Bolt with cut Threads for Structures - ABM [JIS]
JIS B 1220 (ABM) - 2015 		Set of Anchor Bolt with cut Threads for Structures - ABM
73 Stainless Steel Double-end Stud Bolt [JIS]
JIS A 5540 - 2008 		Stainless Steel Double-end Stud Bolt
74 Double End Studs [YJT]
YJT 2003 (BCEQ-9411 A1) 		Double End Studs
75 Double End Studs [CNS]
CNS 4605 - 1978 		Double End Studs
76 Double End Studs [CNS]
CNS 4604 - 1978 		Double End Studs
77 Double End Studs [CNS]
CNS 4603 - 1978 		Double End Studs
78 Double End Studs [CNS]
CNS 4609 - 1983 		Double End Studs
79 Double End Studs For T-Nuts [CNS]
CNS 4607 - 1983 		Double End Studs For T-Nuts
80 Double End Studs [CNS]
CNS 4606 - 1983 		Double End Studs
81 Double End Studs [GOST]
GOST 22032 - 1976 		Double End Studs
82 Flange Connections of Wellhead Equipment - Stud - Modification 2 [GOST]
GOST 28919 - 1991 		Flange Connections of Wellhead Equipment - Stud - Modification 2
83 Flange Connections of Wellhead Equipment - Stud - Modification 1 [GOST]
GOST 28919 - 1991 		Flange Connections of Wellhead Equipment - Stud - Modification 1