简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Grooved Pins-Full-Length Parallel Grooved, With Chamfer

ISO 8740 - 1997

Display drawing:

国际ISO 8740 - 1997 ISO8740 8740ISO Grooved Pins-Full-Length Parallel Grooved, With Chamfer
Download CAD Model
Nominal Diameter
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max
min
d1 min
max
c2 ≈
c
c1 ≈
Minimum Double Shear,kN
L
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
0.12 0.18 0.25 0.3 0.4 0.5 0.6 0.8 1 1.2 1.6 2 2.5
0.6 0.8 1 1.2 1.4 1.7 2.1 2.6 3 3.8 4.6 6 7.5
0.2 0.25 0.3 0.4 0.5 0.63 0.8 1 1.2 1.6 2 2.5 3
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
8~20 8~30 10~30 10~40 10~60 14~60 14~80 14~100 14~100 18~100 22~100 26~100 26~100
①,The grooving angle "a" applies only to grooved pins made from steel (a≈70°). The grooving angle may be modified depending on resilience of material.
②,r ≈ d
Send Inquiry

Similar Standards

1 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins -- Half-Length Centre Grooved
2 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
3 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins, full-length parallel grooved-metric series
4 Grooved Pins. Full-Length Parallel Grooved,With Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved,With Chamfer
5 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved pins - 1/3 Length Centre Grooved
6 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
7 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
8 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved With Gorge
9 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
10 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
11 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved With Gorge
12 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved With Pilot
13 Full-length Parallel Grooved, With Chamfer [EN]
EN 28740 - 1992 		Full-length Parallel Grooved, With Chamfer
14 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
15 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved pins - Type F
16 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved With Chamfer
17 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
18 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type E
19 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved pins - Type F
20 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011 		Grooved pins, Half length grooved with gorge
21 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
22 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
23 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
24 Grooved Pins-Full-Length Parallel Grooved, With Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Pilot
25 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins—half-length centre grooved
26 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Grooved pins metric series with half-length grooved
27 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins with one third length groove in the middle
28 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved
29 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
30 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-One-Third-Length Centre Grooved
31 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved pin, full length parallel grooved with pilot
32 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved With Chamfer
33 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
34 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
35 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins — Full-length Parallel Grooved, With Pilot
36 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, With Chamfer
37 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004 		Grooved pins-One-third-length centre grooved
38 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-Length Centre Grooved
39 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved With Pilot
40 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-Full-Length Parallel Grooved, With Chamferw
41 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
42 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
43 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F