简体 | 繁體 | FastenerExpo |

Metric square keys

ASME/ANSI B 18.25.1M - 1996

Display drawing:

美标ASME/ANSI B18.25.1M - 1996 ASME/ANSI18 Metric square keys

Scan QR Code

Show on Mobile terminal.
Share with friends!

Similar Standards

1 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885-1 (A) - 2021
Parallel Keys, Deep Pattern - Type A

View Suppliers
2 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885 (A) - 1968
Parallel Keys, Deep Pattern - Type A

View Suppliers
3 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885-1 (D) - 2021
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
4 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885-1 (H) - 2021
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
5 Metric Interference Fit Flat Key [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998
Metric Interference Fit Flat Key
6 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885-1 (E) - 2021
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
7 Square Key [DIN]
DIN 6880 (A) - 2011
Square Key
8 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885 (G) - 1968
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
9 Square Key [DIN]
DIN 6880 - 1975
Square Key
10 Rectangular Key [DIN]
DIN 6880 - 1975
Rectangular Key
11 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885 (D) - 1968
Parallel Keys,With Step Bore Fore Fixation Screw - Type D
12 Slot stones, loose - Form C [DIN]
DIN 6323 (C) - 2003
Slot stones, loose - Form C
13 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885 (E) - 1968
Parallel Keys, With Two Step Bores For Fixation Screw - Type E
14 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885-1 (G) - 2021
Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
15 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885 (B) - 1968
Parallel Keys, Deep Pattern - Type B
16 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885-1 (F) - 2021
Parallel Keys, With Two Step Bores For Fixation Screw - Type F
17 Flat Rectangular Key [DIN]
DIN 6880 (C) - 2011
Flat Rectangular Key
18 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885 (H) - 1968
Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
19 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885-1 (J) - 2021
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
20 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885-1 (B) - 2021
Parallel Keys, Deep Pattern - Type B
21 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885 (J) - 1968
Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
22 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885 (C) - 1968
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
23 Slot stones, loose - Form A [DIN]
DIN 6323 (A) - 2003
Slot stones, loose - Form A
24 Thin Parallel Keys [ISO]
ISO 2491 - 1974
Thin Parallel Keys
25 Slot stones, loose - Form B [DIN]
DIN 6323 (B) - 2003
Slot stones, loose - Form B
26 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885 (F) - 1968
Parallel Keys, With Two Step Bores For Fixation Screw - Type F
27 Metric Square And Pectang-Ular Keys [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 (R2008)
Metric Square And Pectang-Ular Keys
28 Rectangular Key [DIN]
DIN 6880 (B) - 2011
Rectangular Key
29 Flat Rectangular Key [DIN]
DIN 6880 - 1975
Flat Rectangular Key
30 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885-1 (C) - 2021
Parallel Keys, with Step Bore Fore Fixation Screw - Type C
31 Square And Rectangular Keys [GB]
GB 1097 - 1979
Square And Rectangular Keys
32 Parallel keys - Type IV [UNI]
UNI 6605 - 1969
Parallel keys - Type IV
33 Parallel keys - Type II [UNI]
UNI 6605 - 1969
Parallel keys - Type II
34 Parallel keys - Type V [UNI]
UNI 6605 - 1969
Parallel keys - Type V
35 Parallel keys - Type III [UNI]
UNI 6605 - 1969
Parallel keys - Type III
36 Square And Rectangular Keys [GB]
GB /T 1096 - 2003
Square And Rectangular Keys
37 Thin parallel keys [UNI]
UNI 7510 - 1976
Thin parallel keys
38 Flat key [UNI]
UNI 6604 - 1969
Flat key
39 Square And Rectangular Keys [GB]
GB /T 1097 - 2003
Square And Rectangular Keys
40 Sguare And Rectangular Thin Keys [GB]
GB 1567 - 1979
Sguare And Rectangular Thin Keys
41 Parallel keys - Type VI [UNI]
UNI 6605 - 1969
Parallel keys - Type VI
42 Square and Rectangular keys [GB]
GB /T 1096 - 1979
Square and Rectangular keys
43 Parallel keys - Type I [UNI]
UNI 6605 - 1969
Parallel keys - Type I
44 Sguare And Rectangular Thin Keys [GB]
GB /T 1567 - 2003
Sguare And Rectangular Thin Keys
45 Keys couplings with prismatic Keys [GOST]
GOST 23360 - 1978
Keys couplings with prismatic Keys
46 Type A - Keys with both ends round [IS]
IS 2048 (A) - 1983
Type A - Keys with both ends round
47 Type B - Keys with both ends square [IS]
IS 2048 (B) - 1983
Type B - Keys with both ends square
48 Type C - keys with both ends round with  hole for one retaining screw [IS]
IS 2048 (C) - 1983
Type C - keys with both ends round with hole for one retaining screw
49 Type D - keys with both ends square with hole for one retaining screw [IS]
IS 2048 (D) - 1983
Type D - keys with both ends square with hole for one retaining screw
50 Type E - Keys with both ends round with holes for two retaining screws [IS]
IS 2048 (E) - 1983
Type E - Keys with both ends round with holes for two retaining screws
51 Type F - Keys with both ends square with holes for two retaining screws [IS]
IS 2048 (F) - 1983
Type F - Keys with both ends square with holes for two retaining screws
52 Type G - keys with both ends square with chamfer and hole for one retaining screw [IS]
IS 2048 (G) - 1983
Type G - keys with both ends square with chamfer and hole for one retaining screw
53 Type H - Keys with both ends square with chamfer and holes for two retaining screws [IS]
IS 2048 (H) - 1983
Type H - Keys with both ends square with chamfer and holes for two retaining screws
54 Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve [IS]
IS 2048 (J) - 1983
Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve