Click Specification

Grooved Pins - Type H

ASME B 18.8.2 - 2000 (R2010)

Display drawing:

Nominal Diameter

1/32

3/64

1/16

5/64

3/32

7/64

1/8

5/32

3/16

7/32

1/4

5/16

3/8

7/16

1/2

Nominal Size
d	max
d	min
c	Ref.
a	min

0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0297	0.0454	0.0610	0.0766	0.0923	0.1074	0.1230	0.1543	0.1855	0.2168	0.2480	0.3105	0.3730	0.4355	0.4980
0.015	0.031	0.031	0.031	0.031	0.031	0.031	0.062	0.062	0.062	0.062	0.094	0.094	0.094	0.094
-	-	0.005	0.005	0.005	0.005	0.005	0.005	0.016	0.016	0.016	0.031	0.031	0.031	0.031

Alternative history

ASME B 18.8.2 - 2000(R2010) ASME B 18.8.2 - 2020

Send Inquiry

Similar Standards

1	[DIN EN ISO] DIN EN ISO 8743 - 1998	Grooved Pins -- Half-Length Centre Grooved
2	[ASME] ASME B 18.8.2 - 2020	Grooved pins - Type F
3	[EN] EN 28743 - 1992	Grooved Pins - Half-Length Centre Grooved
4	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved Pins - Type G
5	[DIN] DIN 1469 - 2012	Grooved Pins, Half Length Grooved With Gorge
6	[EN] EN 28740 - 1992	Full-length Parallel Grooved, With Chamfer
7	[DIN EN ISO] DIN EN ISO 8739 - 1998	Grooved Pin, Full Length Parallel Grooved With Pilot
8	[ASME] ASME B 18.8.2 - 2020	Grooved Pins - Type G
9	[ISO] ISO 8739 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Pilot
10	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved pins - Type F
11	[ISO] ISO 8740 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Chamfer
12	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Grooved pins metric series with half-length grooved
13	[EN ISO] EN ISO 8743 - 1997	Grooved Pins - Half-Length Centre Grooved
14	[ASME] ASME B 18.8.2 - 2020	Grooved Pins - Type H
15	[ISO] ISO 8743 - 1997	Grooved Pins-Half-Length Centre Grooved
16	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins with one third length groove in the middle
17	[DIN] DIN 1470 - 1978	Grooved pin, full length parallel grooved with pilot
18	[ISO] ISO 8742 - 1997	Grooved Pins-One-Third-Length Centre Grooved
19	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins, full-length parallel grooved-metric series
20	[DIN] DIN 1469 - 1978	Grooved Pins, Half Length Grooved With Gorge
21	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved Pins - Type E
22	[DIN] DIN 1475 - 1978	Grooved pins - 1/3 Length Centre Grooved
23	[DIN] DIN 1473 - 1978	Grooved Pins, Full Length Parallel Grooved With Chamfer
24	[DIN EN ISO] DIN EN ISO 8740 - 1998	Grooved Pins. Full-Length Parallel Grooved,With Chamfer
25	[ASME] ASME B 18.8.2 - 2020	Grooved Pins - Type E
26	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins—half-length centre grooved
27	[DIN EN ISO] DIN EN ISO 8742 - 1998	Grooved Pins - 1/3 Length Centre Grooved
28	[DIN] DIN 1469 - 2011	Grooved pins, Half length grooved with gorge
29	[GB] GB /T 13829.3 - 2004	Grooved pins-One-third-length centre grooved
30	[GB] GB /T 13829.2 - 2004	Grooved Pin, Full Length Parallel Grooved With Chamfer
31	[GB] GB /T 13829.1 (A) - 1992	Grooved pin, full length parallel grooved with pilot
32	[NF] NF E 25-750 - 1997	Grooved Pins. Half Length Centre Grooved
33	[GB] GB /T 13829.1 (B) - 1992	Grooved Pins-Full-Length Parallel Grooved, With Chamferw
34	[GB] GB /T 13829.4 - 2004	Grooved Pins - Half-Length Centre Grooved
35	[NF] NF E 25-763 - 1997 (R2002)	Grooved Pins. One-Third-Length Centre Grooved
36	[GB] GB /T 13829.1 - 2004	Grooved Pin, Full Length Parallel Grooved With Pilot
37	[GB] GB /T 13829.1 (D) - 1992	Grooved Pins - Half-Length Centre Grooved
38	[NF] NF E 25-772 - 1997 (R2002)	Grooved Pins. Full Length Paralled Grooved, With Chamfer
39	[NF] NF E 25-761 - 1997	Grooved Pins — Full-length Parallel Grooved, With Pilot
40	[GB] GB /T 13829.1 (C) - 1992	Grooved Pins-One-Third-Length Centre Grooved
41	[SAE] SAE J 494 (C) - 2004	Grooved Straight Pins - Type C
42	[SAE] SAE J 494 (E) - 2004	Grooved Straight Pins - Type E
43	[SAE] SAE J 494 (F) - 2004	Grooved Straight Pins - Type F