简体 | 繁體 | FastenerExpo |

Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)

ASME/ANSI B 18.31.3 - 2009

Display drawing:

美标ASME/ANSI B18.31.3 - 2009 ASME/ANSI18. Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)

Scan QR Code

Show on Mobile terminal.
Share with friends!

Similar Standards

1 ISO - Metric Trapezoidal Screw Threads [DIN]
DIN 103 - 1 - 1977
ISO - Metric Trapezoidal Screw Threads
2 Plastic threads [DIN]
DIN 7505 - 1986
Plastic threads
3 AB self-tapping teeth [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
AB self-tapping teeth
4 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T41) - 2013
Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
5 Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths [ISO]
ISO 888 - 2012
Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths
6 Whitworth pipe threads for pipe unions [DIN]
DIN 3858 - 2005
Whitworth pipe threads for pipe unions
7 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T42) - 2013
Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
8 Threads and thread ends for tapping screws [DIN]
DIN 7970 - 1984
Threads and thread ends for tapping screws
9 Triangle lock self-tapping teeth--D、F、G [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
Triangle lock self-tapping teeth--D、F、G
10 Thread and body dimeters for wood screws [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1981 (R2016)
Thread and body dimeters for wood screws
11 Metric Self-tapping Thread End [IFI]
IFI 502 - 1982
Metric Self-tapping Thread End
12 self-tapping teeth-B [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
self-tapping teeth-B
13 Tapping Screws Thread [ISO]
ISO 1478 - 1999
Tapping Screws Thread
14 Self-tapping teeth-BF [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
Self-tapping teeth-BF
15 Typ C, Thread Forming Tapping Screws  [Table V1] [ASME]
ASME B 18.6.4 (C) - 1998
Typ C, Thread Forming Tapping Screws [Table V1]
16 Metric triangle lock with thread end [IFI]
IFI 502 - 1982
Metric triangle lock with thread end
17 Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T40) - 2013
Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
18 Thread and thread ends for wood screws [DIN]
DIN 7998 - 1975
Thread and thread ends for wood screws
19 Type A, Thread Forming Tapping Screws  [Table E1] [ASME]
ASME B 18.6.4 (A) - 1998
Type A, Thread Forming Tapping Screws [Table E1]
20 Wood thread [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1981
Wood thread
21 Lag screw threads [ASME/ANSI]
ASME/ANSI B 18.2.1 - 2010
Lag screw threads
22 Type AB, Thread Forming Tapping Screws [Table 5] [ASME]
ASME B 18.6.4 (AB) - 1998
Type AB, Thread Forming Tapping Screws [Table 5]
23 Type B and BP, Thread Forming Tapping Screws [Table 6] [ASME]
ASME B 18.6.4 (B/BP) - 1998
Type B and BP, Thread Forming Tapping Screws [Table 6]
24 Pipe threads where pressure-tight joints are not made on the threads [ISO]
ISO 228-1 - 2000
Pipe threads where pressure-tight joints are not made on the threads
25 Wood thread [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1997
Wood thread
26 ISO metric trapezoidal screw threads - Basic and design profiles [ISO]
ISO 2901 - 2016
ISO metric trapezoidal screw threads - Basic and design profiles
27 Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles [GB]
GB /T 13576.1 - 2008
Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles
28 Specification for wood screws [GB]
GB /T 922 - 1986
Specification for wood screws
29 Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads [GB]
GB /T 7307 - 2001
Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads
30 General purpose metric screw threads-Basic profile(ISO 68-1:1998, MOD) [GB]
GB /T 192 - 2003
General purpose metric screw threads-Basic profile(ISO 68-1:1998, MOD)
31 The threads for transition fit [GB]
GB 1167 - 1996
The threads for transition fit
32 Internal thread for wire thread inserts [GB]
GB /T 24425.5 - 2009
Internal thread for wire thread inserts
33 Screws thread shanks for thread forming  screw-Metric coarse thread series [GB]
GB /T 6559 - 1986
Screws thread shanks for thread forming screw-Metric coarse thread series
34 The interference-fit threads [GB]
GB /T 1181 - 1998
The interference-fit threads
35 General purpose metric screw threads - Preferable plan [GB]
GB /T 9144 - 2003
General purpose metric screw threads - Preferable plan
36 Tapping screw threads and ends [JIS]
JIS B 1125 (1) - 2003
Tapping screw threads and ends
37 General purpose metric screw threads - The plan for pipe systems [GB]
GB /T 1414 - 2003
General purpose metric screw threads - The plan for pipe systems
38 General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan [GB]
GB /T 9146 - 2003
General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
39 Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983) [GB]
GB /T 3 - 1997
Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)
40 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads(eqv ISO 7-1:1994) [GB]
GB /T 7306.2 - 2000
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads(eqv ISO 7-1:1994)
41 General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan [GB]
GB /T 9145 - 2003
General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
42 General purpose metric screw threads - Limits of sizes [GB]
GB /T 15756 - 2008
General purpose metric screw threads - Limits of sizes
43 Locking threads with 30 degree wedge ramp [GB]
GB /T 37462 - 2019
Locking threads with 30 degree wedge ramp
44 Thread and point details for Type A threads  [TABLE 23] [BS]
BS 4174 - 1972
Thread and point details for Type A threads [TABLE 23]
45 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads(eqv ISO 7-1:1994) [GB]
GB /T 7306.1 - 2000
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads(eqv ISO 7-1:1994)
46 General purpose metric screw threads - Tolerances [GB]
GB /T 197 - 2018
General purpose metric screw threads - Tolerances
47 Dryseal pipe threads with the thread angle of 60 degrees [GB]
GB /T 27944 - 2011
Dryseal pipe threads with the thread angle of 60 degrees
48 Limits of sizes and tolerances for metric coarse screw threads [JIS]
JIS B 0209 - 1997
Limits of sizes and tolerances for metric coarse screw threads
49 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 2015
Tapping Screw Threads and Ends
50 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 1995
Tapping Screw Threads and Ends
51 Trapezoidal screw threads - Part 1: Profiles [GB]
GB /T 5796.1 - 2005
Trapezoidal screw threads - Part 1: Profiles
52 Tapping screws thread [GB]
GB /T 5280 - 2002
Tapping screws thread
53 The blank diameters for rolling general purpose metric screw threads [GB]
GB /T 18685 - 2017
The blank diameters for rolling general purpose metric screw threads
54 Thread and point details for Type Y thread cutting screws  [TABLE 6] [BS]
BS 4174 - 1972
Thread and point details for Type Y thread cutting screws [TABLE 6]
55 Metric threads where pressure-tight joints are made on the threads [GB]
GB /T 1415 - 2008
Metric threads where pressure-tight joints are made on the threads
56 General purpose metric screw threads - Basic dimenslons [GB]
GB /T 196 - 2003
General purpose metric screw threads - Basic dimenslons
57 General purpose metric screw threads - Limit deviations [GB]
GB /T 2516 - 2003
General purpose metric screw threads - Limit deviations
58 US triangle lock thread-S type [Others]
YJT 1025 - 2012
US triangle lock thread-S type
59 Metric triangle lock thread-S type [Others]
YJT 1026 - 2012
Metric triangle lock thread-S type
60 Metric triangle lock thread-C type [Others]
YJT 1027 - 2012
Metric triangle lock thread-C type
61 Metric triangle lock thread-B type [Others]
YJT 1028 - 2012
Metric triangle lock thread-B type
62 Metric triangle lock thread-P type [Others]
YJT 1029 - 2012
Metric triangle lock thread-P type