简体 | 繁體 | FastenerExpo |

80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]

ASME B 18.6.3 (T11t) - 2013

Display drawing:

美标ASME B18.6.3 (T11t) - 2013 ASME18.6.3  80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]
Thread Size
d
0# 1# 2# 3# 4# 5# 6# 7# 8# 10# 12#
d Nominal Size
PP
L
dk max
min
k Ref
f Ref.
n max
min
t max
min
0.0600 0.0730 0.0860 0.0990 0.1120 0.1250 0.1380 0.1510 0.1640 0.1900 0.2160
- 64 56 48 40 40 32 - 32 24 24
1/8 1/8 1/8 1/8 3/16 3/16 3/16 / 1/4 5/16 3/8
0.112 0.137 0.162 0.187 0.212 0.237 0.262 0.287 0.312 0.362 0.412
0.096 0.120 0.144 0.167 0.191 0.215 0.238 0.262 0.285 0.333 0.380
0.025 0.031 0.036 0.042 0.047 0.053 0.059 0.064 0.070 0.081 0.092
0.021 0.025 0.029 0.033 0.037 0.041 0.045 0.049 0.052 0.060 0.068
0.023 0.026 0.031 0.035 0.039 0.043 0.048 0.048 0.054 0.060 0.067
0.016 0.019 0.023 0.027 0.031 0.035 0.039 0.039 0.045 0.050 0.056
0.028 0.034 0.040 0.047 0.053 0.059 0.065 0.071 0.078 0.090 0.103
0.022 0.027 0.033 0.038 0.043 0.048 0.053 0.059 0.064 0.074 0.085
Thread Size
d
14# 1/4 16# 18# 5/16 20# 24# 3/8 7/16 1/2
d Nominal Size
PP
L
dk max
min
k Ref
f Ref.
n max
min
t max
min
0.2420 0.2500 0.2680 0.2940 0.3125 0.3200 0.3720 0.3750 0.4375 0.5000
- 20 - - 18 - - 16 14 13
/ 7/16 / / 1/2 / / 9/16 5/8 3/4
0.462 0.477 0.512 0.561 0.597 0.611 0.711 0.717 0.760 0.815
0.427 0.442 0.475 0.522 0.556 0.569 0.664 0.670 0.715 0.765
0.104 0.107 0.115 0.126 0.134 0.137 0.160 0.161 0.156 0.156
0.076 0.079 0.084 0.092 0.099 0.100 0.116 0.117 0.122 0.131
0.075 0.075 0.075 0.084 0.084 0.084 0.094 0.094 0.094 0.106
0.064 0.064 0.064 0.072 0.072 0.072 0.081 0.081 0.081 0.091
0.115 0.119 0.127 0.140 0.149 0.152 0.177 0.179 0.184 0.204
0.096 0.098 0.106 0.116 0.124 0.127 0.148 0.149 0.154 0.169
①,Edge of head may be rounded or flat.
②,Screws of these lengths and shorter shall have undercut heads.
③,7#, 14#, 16#, 18#, 20#, 24# are for tapping screws only.
⑤,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread.
⑥,Machine Screw Length of Thread 1) Sizes No.5 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in. 2) Sizes No.6 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.

Similar Standards

1 Slotted Raised Countersunk (Oval) Head Tapping Screws [DIN EN ISO]
DIN EN ISO 1483 - 2011
Slotted Raised Countersunk (Oval) Head Tapping Screws

View Suppliers
2 Slotted Raised Countersunk Head Tapping Screws [DIN]
DIN 7973 - 1990
Slotted Raised Countersunk Head Tapping Screws

View Suppliers
3 slotted Oval Countersunk Head Tapping Screws - Type AB Thread Forming [Table 20] [ASME]
ASME B 18.6.4 - 1998
slotted Oval Countersunk Head Tapping Screws - Type AB Thread Forming [Table 20]
4 Metric Slotted Oval Countersunk Head Tapping Screws [IFI]
IFI 502 - 1982
Metric Slotted Oval Countersunk Head Tapping Screws
5 Slotted Raised Countersunk (Oval) Head Tapping Screws [ISO]
ISO 1483 - 2011
Slotted Raised Countersunk (Oval) Head Tapping Screws
6 slotted Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 20] [ASME]
ASME B 18.6.4 - 1998
slotted Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 20]
7 Metrice slotted raised countersunk  head tapping screws [Table 12] [ASME]
ASME B 18.6.5M - 2000 (R2010)
Metrice slotted raised countersunk head tapping screws [Table 12]
8 Slotted raised countersunk head tapping screws [ISO]
ISO 1483 - 1983
Slotted raised countersunk head tapping screws
9 slotted Oval Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 20] [ASME]
ASME B 18.6.4 - 1998
slotted Oval Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 20]
10 80° Machine Screw and Tapping Screw Nuts (Inch Seires) [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires)
11 slotted Oval Countersunk Head Tapping Screws - Type A Thread Forming [Table 20] [ASME]
ASME B 18.6.4 - 1998
slotted Oval Countersunk Head Tapping Screws - Type A Thread Forming [Table 20]
12 82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7] [ASME]
ASME B 18.6.3 (T7+T40) - 2013
82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7]
13 Slotted raised countersunk head tapping screws [GB]
GB /T 5284 - 1985
Slotted raised countersunk head tapping screws
14 Slotted Raised Countersunk Head Tapping Screws [JIS]
JIS B 1115 (O) - 2006
Slotted Raised Countersunk Head Tapping Screws
15 Slotted Raised Countersunk (Oval) Head Tapping Screws [NF]
NF E 25-661 - 1994
Slotted Raised Countersunk (Oval) Head Tapping Screws
16 Slotted raised countersunk head tapping screws [JIS]
JIS B 1115 (O) - 1996
Slotted raised countersunk head tapping screws
17 Raised countersunk head tapping screws [JIS]
JIS B 1115 (O) - 1995
Raised countersunk head tapping screws
18 Slotted Raised Countersunk(Oval) Head Tapping Screws [GB]
GB /T 5284 - 2017
Slotted Raised Countersunk(Oval) Head Tapping Screws
19 Slotted 80° truncated Raised Countersunk Head Screws [Table 14] [BS]
BS 4174 - 1972
Slotted 80° truncated Raised Countersunk Head Screws [Table 14]
20 Cross Recess 80° Raised Countersunk Head Tapping Screws  [Table 13] [BS]
BS 4174 - 1972
Cross Recess 80° Raised Countersunk Head Tapping Screws [Table 13]
21 80°Slotted Raised Countersunk Head Tapping Screws [Table 12] [BS]
BS 4174 - 1972
80°Slotted Raised Countersunk Head Tapping Screws [Table 12]
22 ISO metric slotted raised countersunk head tapping screws [AS]
AS /NZS 4405 - 1996
ISO metric slotted raised countersunk head tapping screws