1 |
[GB]
GB /T 91 - 2000 |
Split Pins
View Suppliers |
|
2 |
[GB]
GB 91 - 1986 |
Split Pins
View Suppliers |
|
3 |
[ISO]
ISO 1234 - 1997 |
Split Pins | |
4 |
[ASME/ANSI]
ASME/ANSI B 18.8.1 - 2000 |
Split Pins | |
5 |
[ASME]
ASME B 18.8.1 - 2014 |
Split Pins | |
6 |
[DIN]
DIN 94 - 1983 |
Split Pins | |
7 |
[ASME/ANSI]
ASME/ANSI B 18.8.6M - 1995 |
Metric cotter pins-metric series | |
8 |
[DIN]
DIN 11024 - 1973 |
Spring Cotters | |
9 |
[DIN]
DIN 48063 (-1) - 1978 |
Split Pins, Form VN | |
10 |
[ISO]
ISO 1234 - 1976 |
Split pins | |
11 |
[UNI]
UNI 1336 |
Split Pins (Cotter Pins) | |
12 |
[JIS]
JIS B 1351 - 1987 |
Split Pins | |
13 |
[NF]
NF E 25-774 - 1997 (R2002) |
Split Pins | |
14 |
[BS]
BS 1574 - 1994 |
Split Pins | |
15 |
[KS]
KS B 1321 - 2000 |
Split Pins | |
16 |
[IS]
IS 549 - 2005 |
Split Pins |
①,Nominal size = diameter of the split pin hole; for the pin hole diameter the following tolerance classes are recommended: H13 for nominal size ≤ 1.2, H14 for nominal slze > 1.2. ②,Material: a)St=Steel; b)CuZn=Copper-zinc alloy; c)Cu=Copper; d)Al=Aluminum alloy; e)A=Austenitic stainless steel; f)Other material shall be subject to agreement Ductility: Each leg of the split pin shall be capable of withstanding being bent back upon itself once, with no visible indication of fracture occuring at the point of bend. |