DIN EN ISO 8740 - 1998 Grooved Pins. Full-Length Parallel Grooved,With Chamfer


Unit: mm
Screw Thread
d
Φ1.5 Φ2 Φ2.5 Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ16 Φ20 Φ25
d max=nominal size
min
d1 max
min=nominal size
Minimum Double Shear,KN
1.5 2 2.5 3 4 5 6 8 10 12 16 20 25
1.475 1.975 2.475 2.975 3.925 4.925 5.925 7.91 9.91 11.89 15.89 19.87 24.87
1.65 2.2 2.7 3.25 4.3 5.3 6.35 8.35 10.4 12.45 16.5 20.6 25.6
1.6 2.15 2.6 3.15 4.2 5.2 6.25 8.25 10.3 12.25 16.3 20.4 25.4
1.6 2.84 4.4 6.4 11.3 17.6 25.4 45.2 70.4 101.8 181 283 444
Alternative history
Suppliers
You will get the best price if inform us the information comes from GlobalFastener.com.
1
China Mainland Nanjing Dongming Fasteners Co.,Ltd
Wang Jiajie
Mobile Phone: +86-13851939828 Telephone: +86-25-86183701-8026
Material: 304 / 316 stainless steel; Grade: A2-70, A4-80; Nominal diameter: φ2-φ10; Nominal length: 5-70mm
Contact us via Email
Similar Standards
1 A型-带导杆及全长平行沟槽的槽销. [GB]
GB /T 13829.1 (A) - 1992
Grooved pin, full length parallel grooved with pilot
2 B型-带倒角及全长平行沟槽槽销. [GB]
GB /T 13829.1 (B) - 1992
Grooved Pins-Full-Length Parallel Grooved, With Chamferw
3 C型-中部带1/3全长平行沟槽的槽销 [GB]
GB /T 13829.1 (C) - 1992
Grooved Pins-One-Third-Length Centre Grooved
4 D型中部带1/2全长平行沟槽的槽销 [GB]
GB /T 13829.1 (D) - 1992
Grooved Pins-one-second-length Centre Groov
5 槽销 带导杆及全长平行沟槽 [GB]
GB /T 13829.1 - 2004
Grooved Pin, Full Length Parallel Grooved With Pilot
6 槽销 带倒角及全长平行沟槽 [GB]
GB /T 13829.2 - 2004
Grooved Pin, Full Length Parallel Grooved With Chamfer
7 槽销 中部槽长为1/2全长 [GB]
GB /T 13829.4 - 2004
grooved pins-half-length centre grooved
8 槽销 中部槽长为1/3全长 [GB]
GB /T 13829.3 - 2004
Grooved pins-One-third-length centre grooved
9 带颈配合槽销,沟槽长为全长1/2 [DIN]
DIN 1469 - 2012
Grooved Pins, Half Length Grooved With Gorge
10 带导杆及全长平行沟槽的槽销 [DIN]
DIN 1470
Grooved pin, full length parallel grooved with pilot
11 带倒角及全长平行沟槽的槽销 [DIN]
DIN 1473 - 1978
Grooved Pins, Full Length Parallel Grooved With Chamfer
Suppliers(1)
12 槽销,中部槽长为1/3全长 [DIN]
DIN 1475 - 1978
Grooved pins - 1/3 Length Centre Grooved
Suppliers(1)
13 带颈配合槽销 [DIN]
DIN 1469 - 1978
Grooved pins, Half length grooved with gorge
14 带颈配合槽销 [DIN]
DIN 1469 - 2011
Grooved pins, Half length grooved with gorge
15 槽销—带导杆及全长平行沟槽 [ISO]
ISO 8739 - 1997
Grooved Pins-Full-Length Parallel Grooved, With Pilot
16 带倒角及全长平行沟槽槽销 [ISO]
ISO 8740 - 1997
Grooved Pins-Full-Length Parallel Grooved, With Chamfer
17 中部带1/3全长平行沟槽的槽销 [ISO]
ISO 8742 - 1997
Grooved Pins-One-Third-Length Centre Grooved
18 中部带1/2全长平行沟槽的槽销 [ISO]
ISO 8743 - 1997
Grooved Pins-Half-Length Centre Grooved
19 米制半长槽销Table5 [ANSI/ASME]
ANSI/ASME B 18.8.100M - 2000 (R2005)
Grooved pins metric series with half-length grooved
20 H型半长槽销 [Table 6] [ANSI/ASME]
ANSI/ASME B 18.8.2 - 2000 (R2005)
Grooved Pins—Type H
21 E型槽销 半长锥槽 [Table 6] [ANSI/ASME]
ANSI/ASME B 18.8.2 - 2000 (R2005)
Grooved Pins—Type E
22 F型全长槽销Table6 [ANSI/ASME]
ANSI/ASME B 18.8.2 - 2000 (R2005)
Grooved pins—type F, L
23 米制槽销Table3 [ANSI/ASME]
ANSI/ASME B 18.8.100M - 2000 (R2005)
Metric grooved pins, full-length parallel grooved-metric series
24 米制中部带1/3全长沟槽的槽销 [ANSI/ASME]
ANSI/ASME B 18.8.100M - 2000 (R2005)
Metric grooved pins with one third length groove in the middle
25 米制中部带1/2全长平行沟槽的槽销 [ANSI/ASME]
ANSI/ASME B 18.8.100M - 2000 (R2005)
Metric grooved pins—half-length centre grooved
26 中部带1/2全长平行沟槽的槽销 [NF]
NF E 25-750 - 1997
Grooved Pins. Half Length Centre Grooved
27 槽销 带导向的全长平行槽 [NF]
NF E 25-761 - 1997
Grooved Pins — Full-length Parallel Grooved, With Pilot
28 中部带1/3全长平行沟槽的槽销 [NF]
NF E 25-763 - 1997 (R2002)
Grooved Pins. One-Third-Length Centre Grooved
29 带倒角及全长平行沟槽的槽销 [NF]
NF E 25-772 - 1997 (R2002)
Grooved Pins. Full Length Paralled Grooved, With Chamfer
30 槽销 中部槽长为1/2全长 [DIN EN ISO]
DIN EN ISO 8743 - 1998
Grooved Pins -- Half-Length Centre Grooved
31 带导杆及全长平行沟槽的槽销 [DIN EN ISO]
DIN EN ISO 8739 - 1998
Grooved Pin, Full Length Parallel Grooved With Pilot
32 槽销,中部带1/3全长平行沟槽 [DIN EN ISO]
DIN EN ISO 8742 - 1998
Grooved Pins - 1/3 Length Centre Grooved
Suppliers(1)