DIN 6913 - 1987 Spring Lock Washers with Safety Ring


Unit: mm
德标DIN 6913 - 1987 DIN6913 6913DIN Spring Lock Washers with Safety Ring
Screw Thread
d
Φ3 Φ4 Φ5 Φ6 Φ8 Φ10 Φ12 Φ14 Φ16 Φ18
d min
dc
d1 max
min
h
H max
min
per 1000 units ≈ kg
3.1 4.1 5.1 6.1 8.2 10.2 12.2 14.2 16.2 18.2
5.4 6.7 8.25 9.5 12.5 15 17.5 21 24 27
7 9 11 12 16 19 22 27 30 34
6.7 8.7 10.6 11.6 15.6 18.5 21.5 26.5 29.5 33.5
1.25 1.75 2 2.25 2.75 3 3.5 4.5 5 5.5
3 4.2 4.8 5.4 6.6 7.2 8.4 10.8 12 13.2
2 2.8 3.2 3.6 4.4 4.8 5.6 7.2 8 8.8
0.3 0.68 1.18 1.49 3.18 4.7 7.28 14.5 19.8 27.6
Screw Thread
d
Φ20 Φ22 Φ24 Φ27 Φ30 Φ33 Φ36 Φ39 Φ42
d min
dc
d1 max
min
h
H max
min
per 1000 units ≈ kg
20.2 22.5 24.5 27.5 30.5 33.5 36.5 39.5 42.5
30 34 34 39 42 48 52 56 60
38 42 42 48 52 58 62 70 75
37.2 41.2 41.2 47.2 51 57 61 69 74
6.1 6.6 7.1 7.1 7.1 8.1 9.1 10.1 11.1
14.6 15.8 17 17 17 19.4 21.8 24.2 26.6
9.8 10.6 11.4 11.4 11.4 13 14.6 16.2 17.8
38.3 46.6 16.1 67.4 76.3 105 141 208 269
①,Test values for the spring force test as described in DIN 267 Part 26 have not as ye been specified for this nominal size.
②,Test values for the test for permanent set as described in DIN 267 Part 26 have not as yet been specified for this nominal size.
③,Technical delivery conditions
DIN 267 Part 26 shall apply with regard to the technical delivary conditions for spring lock washers made of spring steel. The technical delivery conditions for spring lock washers made of copper-zinc alloys shall be the subject of agreement.
Material:
FSt = spring steel as specified in DIN 267 Part 26, or CuSn 8 as specified in DIN 17662 (only up to nominal size 22).
safety ring: St = steel.
CuZn = copper-zinc alloy.
④,Explanatory notes
By mainaining a sufficiently high preioading in a bolt/nut assembly, spring washers are designed to prevent loosening of the assembly, which may be caused, for instance, by the effect of setting in the assembly. The specification of residual spring forces in DIN 267 Part 26 has made it possible for the first time to assess the performance of spring washers. Owing to the spring forces which may be achived (see DIN 267 Part 26) by using spring lock washers as covered in the present standard, such washers are only suitable for bolt/nut assemblies involving bolts of property class 5.8 or less. When spring lock washers with safety ring were developed, the heat treatment methods available at the time were not able to ensure that the washers would not fracture during service. The purpose of the safety ring was to retain the fragments of the washer should it break and thus to prevent further damage occurring, particularly in the case of electrical installations. The problem has now been resolved and it is intended to withdraw this standard after a transitional period of five years. It is crcommended that spring lock washers as specified in DIN 128 should be used instead of those specified in the present standard.
Similar Standards
1 组合件用弹簧垫圈 [GB]
GB 9074.26 - 1988
Single Coil Spring Lock Washer For Assembly
Suppliers(4)
2 重型弹簧垫圈 [GB]
GB 7244 - 1987
Single Coil Spring Lock Washers Heavy Type
Suppliers(6)
3 轻型弹簧垫圈 [GB]
GB 859 - 1987
Single Coil Spring Lock Washers,Light Type
Suppliers(4)
4 标准型弹簧垫圈 [GB]
GB /T 93 - 1987
Single Coil Spring Lock Washers, Normal Type
Suppliers(8)
5 弹垫 [GB]
GB /T 93 - 1976
Single coil spring lock washers,Normal type
Suppliers(8)
6 A型 弹簧垫圈 [DIN]
DIN 127 (A) - 1987
Spring Lock Washers, With Tang Ends-A type
7 B型 弹簧垫圈 [DIN]
DIN 127 (B) - 1987
Spring Lock Washers, With Square Ends -B type
Suppliers(10)
8 圆柱头螺栓用弹簧垫圈 [DIN]
DIN 7980 - 1987
Spring Lock Washers With Square Ends For Cheese Head Screws
Suppliers(4)
9 重型弹垫 表5 [JIS]
JIS B 1251 - 2018
Spring Washers - Heavy - Duty
Suppliers(2)
10 弹垫  表4 [JIS]
JIS B 1251 - 2018
Spring Lock Washers
Suppliers(4)
11 弹垫 [JIS]
JIS B 1251 - 2001
Spring Lock Washers
Suppliers(4)
12 重型弹垫 [JIS]
JIS B 1251 - 2001
Spring washers--heavy-duty
Suppliers(2)
13 重型弹簧垫圈 [Table 2] [ANSI/ASME]
ANSI/ASME B 18.21.1 - 2009
Dimensions of Heavy Helical Spring-Lock Washers
Suppliers(1)
14 标准型弹簧垫圈 [Table 1] [ANSI/ASME]
ANSI/ASME B 18.21.1 - 2009
Dimensions of Regular Helical Spring-Lock Washers
Suppliers(3)
15 高旋型(轻型)弹簧垫圈 [Table 4] [ANSI/ASME]
ANSI/ASME 18.21.1 - 2009
High-collar helical spring lock washers
16 特大型弹簧垫圈 [Table 3] [ANSI/ASME]
ANSI/ASME B 18.21.1 - 2009
Extra-duty helical spring-lock washers
Suppliers(1)
17 木结构用双层弹簧垫圈 [Table 1] [ANSI/ASME]
ANSI/ASME B 18.21.3 - 2008 (R2013)
Double Coil Helical Spring Lock Washers for Wood Structures
Suppliers(1)
18 重型弹簧垫圈 [ANSI/ASME]
ANSI/ASME B 18.21.1 - 1999
Single coil spring lock washers,heavy type
Suppliers(1)
19 标准型弹垫 [ANSI/ASME]
ANSI/ASME B 18.21.1 - 1999
Regular helical spring lock washers
Suppliers(3)
20 厚型弹垫 [ANSI/ASME]
ANSI/ASME B 18.21.1 - 1999
High-collar helical spring-lock washers
21 宽型弹簧垫圈 [ANSI/ASME]
ANSI/ASME B 18.21.1 - 1999
Extra-duty helical spring-lock washers
Suppliers(1)
22 米制弹簧垫圈 [Table 2] [ANSI/ASME]
ANSI/ASME B 18.21.2M - 1999 (R2014)
Regular Metric Helical Spring Lock Washers
Suppliers(2)
23 米制重型弹簧垫圈 [Table 3] [ANSI/ASME]
ANSI/ASME B 18.21.2M - 1999 (R2014)
Heavy Metric Helical Spring Lock Washers
24 标准型弹簧垫圈 [ANSI/ASME]
ANSI/ASME B 18.21.1 - 1983
Regular helical spring lock washers
Suppliers(3)
25 弹簧垫圈 [UNI]
UNI 1751 - 1941
Single Coil Spring Lock Washers, Normal Series
26 A型 米制弹簧垫圈 [BS]
BS 4464 - 1969
Metric Spring Lock Washers - Type A
27 B型 米制弹簧垫圈 [BS]
BS 4464 - 1969
Metric Spring Lock Washers - Type B
28 BP型 弹簧垫圈 [BS]
BS 4464 - 1969
Metric Spring Lock Washers - Type BP
29 D型 双层弹簧垫圈 [BS]
BS 4464 - 1969
Double Coil Helical Spring Lock Washers - Type D
30 弹簧垫圈 [CNS]
CNS 161 - 1994
Single Coil Spring Lock Washers, Normal Type
31 电器开关用加强型弹簧垫圈 [CNS]
CNS 8930 - 1982
Enhanced Spring Washer For Electric Switch
32 带安全环的弹垫 [CNS]
CNS 4255 - 1978
Spring Lock Washers With Safety Ring
33 标准型弹簧垫圈 [SAE]
SAE J 2655 - 2015
Regular Helical Spring-Lock Washers
34 重型弹簧垫圈 [SAE]
SAE J 2655 - 2015
Heavy Helical Spring-Lock Washers
35 特大型弹簧垫圈 [SAE]
SAE J 2655 - 2015
Extra-Duty Helical Spring-Lock Washers
36 高旋型(轻型)弹簧垫圈 [SAE]
SAE J 2655 - 2015
High-Collar Helical Spring-Lock Washers