简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Rings for shoulder---heavy series

GB /T 886 - 1986

Display drawing:

国标GB /T886 - 1986 GB886 886GB Rings for shoulder---heavy series
Nominal Diameter
d
20 25 30 35 40 45 50 55 60 65
d max
min
D
H max
min
D1 ≥
20.13 25.13 30.13 35.17 40.17 45.17 50.17 55.19 60.19 65.19
20 25 30 35 40 45 50 55 60 65
30 35 40 47 52 58 65 70 75 80
5 5 5 5 5 5 5 6 6 6
4.7 4.7 4.7 4.7 4.7 4.7 4.7 5.7 5.7 5.7
22 27 32 37 42 47 52 58 63 68
Nominal Diameter
d
70 75 80 85 90 95 100 105 110 120
d max
min
D
H max
min
D1 ≥
70.19 75.19 80.19 85.22 90.22 95.22 100.22 105.22 110.22 120.22
70 75 80 85 90 95 100 105 110 120
85 90 100 105 110 115 120 130 135 145
6 6 8 8 8 8 10 10 10 10
5.7 5.7 7.64 7.64 7.64 7.64 9.64 9.64 9.64 9.64
73 78 83 88 93 98 103 109 114 124
Send Inquiry

Similar Standards

1 Adjusting Rings [DIN]
DIN 705 - 2007 		Adjusting Rings
2 Rings for shoulder---mediumn series [GB]
GB /T 886 - 1986 		Rings for shoulder---mediumn series
3 Lock rings with cone pin [GB]
GB /T 883 - 1986 		Lock rings with cone pin
4 Rolling Bearings - Snap Ring [GB]
GB 305 - 1989 		Rolling Bearings - Snap Ring
5 Rings for shoulder---light series [GB]
GB /T 886 - 1986 		Rings for shoulder---light series
6 Lock Rings With Screw And Circlip [GB]
GB 885 - 1986 		Lock Rings With Screw And Circlip
7 Lock Rings With Screws [GB]
GB 884 - 1986 		Lock Rings With Screws
8 Lock Rings At The End Of Shaft With Bolt [GB]
GB 892 - 1986 		Lock Rings At The End Of Shaft With Bolt
9 Lock Rings At The End Of Shaft With Screw [GB]
GB 891 - 1986 		Lock Rings At The End Of Shaft With Screw
10 Ring, Retaining-Spiral, Internal Light Duty, CRES [SAE]
SAE AS 3217 (C) - 2020 		Ring, Retaining-Spiral, Internal Light Duty, CRES