Click Specification

Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T33-VI+T40) - 2013

Display drawing:

Thread Size
d

10#

12#

1/4

5/16

3/8

d
PP
M	Ref.
Socket No.
P	max
	min
s	max
	min
e	min
k	max
	min
d_c	max
	min
c	max
	min
L₀ ^④	Nominal
Y ^④	Fully Threaded	max
b ^④	Thread Length (Long screws)	min

0.1250	0.1380	0.1510	0.1640	0.1900	0.2160	0.2500	0.3125	0.3750
20	20	19	18	16	14	14	12	12
0.111	0.132	0.132	0.155	0.178	0.200	0.221	0.266	0.312
T10	T15	T15	T20	T25	T27	T30	T40	T45
0.050	0.055	0.055	0.070	0.075	0.085	0.100	0.120	0.145
0.040	0.045	0.045	0.055	0.060	0.070	0.085	0.105	0.130
0.188	0.250	0.250	0.250	0.312	0.312	0.375	0.500	0.562
0.181	0.244	0.244	0.244	0.305	0.305	0.367	0.489	0.551
0.202	0.272	0.272	0.272	0.340	0.340	0.409	0.545	0.614
0.070	0.093	0.093	0.110	0.120	0.155	0.190	0.230	0.295
0.058	0.080	0.080	0.096	0.105	0.139	0.172	0.208	0.270
0.260	0.328	0.328	0.348	0.414	0.432	0.520	0.676	0.780
0.240	0.302	0.302	0.322	0.384	0.398	0.480	0.624	0.720
0.025	0.025	0.029	0.031	0.031	0.039	0.050	0.055	0.063
0.015	0.015	0.017	0.019	0.019	0.022	0.030	0.035	0.037
15/16	1	1-1/8	1-1/4	1-3/8	1-5/8	1-13/16	1-13/16	1-7/8
0.050	0.050	0.053	0.056	0.062	0.071	0.071	0.083	0.083
0.750	0.830	0.910	0.980	1.140	1.300	1.500	1.500	1.500

①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable.
③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser.

Send Inquiry

Similar Standards

1	[ASME/ANSI] ASME/ANSI B 18.6.5M - 2000 (R2010)	Hex head flange tapping screws [Table 21]
2	[ASME/ANSI] ASME/ANSI B 18.6.3 - 2010	Machine Screw and Tapping Screw Nuts (Inch Seires)
3	[ASME] ASME B 18.6.3 (T32+T40) - 2013	Plain and Slotted Hex Washer Head Tapping Screws - Type AB and ABR
4	[DIN] DIN 6928 - 2008	Hexagon Washer Head Tapping Screws
5	[ASME] ASME B 18.6.3 (T33-I+T40) - 2013	Cross Recess Indented Hex Washer Head Tapping Screws - Type AB and ABR
6	[DIN] DIN 6928 - 1990	Hexagon Washer Head Tapping Screws
7	[ISO] ISO 7053 - 2011	Hexagon washer head tapping screws
8	[ISO] ISO 10509 - 2012	Hexagon Flange Head Tapping Screws
9	[ISO] ISO 10509 - 1992	Hexagon flange head tapping screws
10	[ISO] ISO 7053 - 1992	Hexagon washer head tapping screws
11	[DIN EN ISO] DIN EN ISO 7053 - 2019	Hexagon Washer Head Tapping Screws
12	[ISO] ISO 7053 - 2019	Hexagon Washer Head Tapping Screws
13	[IFI] IFI 502 - 1982	Metric Hex Flange Head Tapping Screws
14	[GB] GB /T 16824.1 - 1997	Hexagon head tapping screws with collar
15	[BS] BS 7599 - 1992	Metric Hexagon Washer Head Tapping Screws
16	[GB] GB /T 16824.2 - 2016	Hexagon Flange Head Tapping Screws
17	[JIS] JIS B 1127 - 1995	Hexagon Head Self-Tapping Screws With Flange
18	[GB] GB /T 16824.2 - 1997	Hexagon head tapping screws with flange
19	[JIS] JIS B 1123 - 1996	Hexagon Head Tapping Screws With Collar
20	[BS] BS 7600 - 1992	Metric Hexagon Flange Head Tapping Screws
21	[JIS] JIS B 1126 - 1995	Hexagon Head Self-Tapping Screws With Collar
22	[GB] GB /T 16824.1 - 2016	Hexagon Washer Head Tapping Screws
23	[AS] AS /NZS 4409 - 1996	ISO metric hexagon head tapping screws with washers
24	[AS] AS /NZS 4410 - 1996	ISO metric hexagon flange head tapping screws
25	[KS] KS B 1064 - 1997	Hexagon Flange Head Tapping Screws