简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories
ASME/ANSI B 18.6.3 (T46) - 2013 Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

ASME/ANSI B 18.6.3 (T46) - 2013

Display drawing:

美标ASME/ANSI B18.6.3 (T46) - 2013 ASME/AN Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws

Scan QR Code

Show on Mobile terminal.
Share with friends!
Send Inquiry

Similar Standards

1 Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T6) - 2013 		Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
2 Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T43) - 2013 		Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
3 Recess Dimensions for Binding Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T28) - 2013 		Recess Dimensions for Binding Head Screws (Machine Screws Only)
4 Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T12) - 2013 		Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws
5 Rivet shank diameters [ISO]
ISO 1051 - 1999 		Rivet shank diameters
6 Dimensioning and indication of knurling [ISO]
ISO 13444 - 2012 		Dimensioning and indication of knurling
7 Recess Dimensions for Indented Hex Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T33) - 2013 		Recess Dimensions for Indented Hex Washer Head Screws
8 Cross recessed-Z type [ISO]
ISO 4757 - 1983 		Cross recessed-Z type
9 Tapping screw connections - Guideline values for core hole diameters and use [DIN]
DIN 7975 - 2016 		Tapping screw connections - Guideline values for core hole diameters and use
10 Dimensions of Alternate Styles of Points for Thumb and Wing Screws [ASME/ANSI]
ASME/ANSI B 18.17 - 1968 (R1983) 		Dimensions of Alternate Styles of Points for Thumb and Wing Screws
11 Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8] [ASME]
ASME B 18.6.4 (D/F/G/T) - 1998 		Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]
12 Dimensions of Type TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T45) - 2013 		Dimensions of Type TRS Tapping Screws
13 Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements [ISO]
ISO 6157-1 - 1988 		Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements
14 Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements [ISO]
ISO 6157-3 - 1988 		Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements
15 Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13 [DIN]
DIN 78 - 1983 		Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13
16 Fasteners—Bolts,screws and studs—Split pins holes and wire holes [ISO]
ISO 7378 - 1983 		Fasteners—Bolts,screws and studs—Split pins holes and wire holes
17 Recess Dimensions for Combination Slotted Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T37) - 2013 		Recess Dimensions for Combination Slotted Round Head Screws
18 Thread rolling screws for ISO metric thread guidelinge values for hole diameters [DIN]
DIN 7500-2 - 1984 		Thread rolling screws for ISO metric thread guidelinge values for hole diameters
19 Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013 		Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
20 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2005 		Hexalobular internal driving feature for bolts and screws
21 Dimensions of Hexagon Sockets [ASME]
ASME B 18.3 (Table 18) - 2012 		Dimensions of Hexagon Sockets
22 Recess Dimensions for Round Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T39) - 2013 		Recess Dimensions for Round Washer Head Screws
23 Recess Dimensions for Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T36) - 2013 		Recess Dimensions for Round Head Screws
24 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2014 		Hexalobular internal driving feature for bolts and screws
25 Recess Dimensions for Pan Head Screws (Types IA, III, and VI) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T19) - 2013 		Recess Dimensions for Pan Head Screws (Types IA, III, and VI)
26 Recess Dimensions for Oval 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T8) - 2013 		Recess Dimensions for Oval 82° Countersunk Head Screws
27 Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T10) - 2013 		Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws
28 12 point socket for bolts and screws [DIN]
DIN 34824 - 2007 		12 point socket for bolts and screws
29 Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T4) - 2013 		Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only)
30 Recess Dimensions for Indented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T30) - 2013 		Recess Dimensions for Indented Regular and Large Hex Head Screws
31 Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T16) - 2013 		Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws
32 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T31) - 2013 		Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws
33 Knurle [DIN]
DIN 82 - 1973 		Knurle
34 Countersunk head screws - Head configuration and gauging [EN]
EN 27721 - 1991 		Countersunk head screws - Head configuration and gauging
35 Dimensions of Combination Slotted Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T26) - 2013 		Dimensions of Combination Slotted Truss Head Screws
36 Recess Dimensions for Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T25) - 2013 		Recess Dimensions for Truss Head Screws
37 Body and grip lengths for socket head cap screws [ASME]
ASME B 18.3 (Table 4) - 2012 		Body and grip lengths for socket head cap screws
38 Fasteners - Clearanc holes for bolts and screws [DIN EN]
DIN EN 20273 - 1992 		Fasteners - Clearanc holes for bolts and screws
39 Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series [ISO]
ISO 7994 - 1985 		Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series
40 Fasteners—Hexagon products—Widths across flats [ISO]
ISO 272 - 1982 		Fasteners—Hexagon products—Widths across flats
41 Fasteners—Ends of parts with external ISO metric thread [ISO]
ISO 4753 - 2011 		Fasteners—Ends of parts with external ISO metric thread
42 Fasteners─Clearance holes for bolts and screws [ISO]
ISO 273 - 1979 		Fasteners─Clearance holes for bolts and screws
43 Metic threads and points for tapping screws [ASME]
ASME B 18.6.5M - 2000 (R2010) 		Metic threads and points for tapping screws
44 Thread run-outs and thread undercuts [DIN]
DIN 76-1 - 2016 		Thread run-outs and thread undercuts
45 Recess dimensions for Flat Countersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T14) - 2013 		Recess dimensions for Flat Countersunk Trim Head Screws
46 Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T48) - 2013 		Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
47 Recess Dimensions for Fillister Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T22) - 2013 		Recess Dimensions for Fillister Head Screws
48 Cross recessed-H type [ISO]
ISO 4757 - 1983 		Cross recessed-H type
49 Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T44) - 2013 		Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
50 Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters [DIN]
DIN 7500 (-2) - 2016 		Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters
51 Recess Dimensions for Flat 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T2) - 2013 		Recess Dimensions for Flat 82° Countersunk Head Screws
52 60° centre holes - Types R. A. B. and C [DIN]
DIN 332 (-1) - 1986 		60° centre holes - Types R. A. B. and C
53 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions [EN]
EN 10058 - 2018 		Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
54 Type BF and BT, Thread Cutting Tapping Screws [Table 7] [ASME]
ASME B 18.6.4 (BF/BT) - 1998 		Type BF and BT, Thread Cutting Tapping Screws [Table 7]
55 Countersunk head screws—Head configuration and guaging [ISO]
ISO 7721 - 1983 		Countersunk head screws—Head configuration and guaging
56 Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T34) - 2013 		Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws
57 Fasteners—Surface discontinuities— Part2:Nuts [ISO]
ISO 6157-2 - 1995 		Fasteners—Surface discontinuities— Part2:Nuts
58 Hexalobular internal driving feature for bolts and screws [JIS]
JIS B 1015 - 2018 		Hexalobular internal driving feature for bolts and screws
59 Stress area and bearing area for threaded fasteners [GB]
GB /T 16823.1 - 1997 		Stress area and bearing area for threaded fasteners
60 Countersinks for countersunk head screws [GB]
GB /T 152.2 - 2014 		Countersinks for countersunk head screws
61 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2008 		Hexalobular internal driving feature for bolts and screws
62 Flared couplings - Flared end [GB]
GB /T 5652 - 2008 		Flared couplings - Flared end
63 Offset cruciform recess fro rotary fastening devices [GB]
GB /T 12520 - 1990 		Offset cruciform recess fro rotary fastening devices
64 Countersunk flat head screws - Part2: Penetration depth of cross recesses [GB]
GB /T 5279.2 - 1997 		Countersunk flat head screws - Part2: Penetration depth of cross recesses
65 length of semi-tubular rivets [JIS]
JIS B 1215 (T6) - 1976 		length of semi-tubular rivets
66 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2017 		Hexalobular internal driving feature for bolts and screws
67 Cross recesses for screws [GB]
GB 944.1 - 1985 		Cross recesses for screws
68 Woodruff keyways [GB]
GB /T 1098 - 2003 		Woodruff keyways
69 Fasteners - Split pin holes and wire holes （ISO 7378:1983） [GB]
GB 5278 - 1985 		Fasteners - Split pin holes and wire holes （ISO 7378:1983）
70 Knurl [GB]
GB /T 6403.3 - 2008 		Knurl
71 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD) [GB]
GB /T 3106 - 2016 		Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)
72 Hot-rolled channel steel [GB]
GB 707 - 1988 		Hot-rolled channel steel
73 General purpose bolts and screws - Radius under the head [GB]
GB /T 3105 - 2002 		General purpose bolts and screws - Radius under the head
74 Rivet shank diameters (except blind rivets)【ISO 1051:1999】 [GB]
GB 18194 - 2000 		Rivet shank diameters (except blind rivets)【ISO 1051:1999】
75 Countersunk head screws - Head configuration and gauging [GB]
GB /T 5279 - 1985 		Countersunk head screws - Head configuration and gauging
76 Fastners - Widths across flats of hexagon products [GB]
GB 3104 - 1982 		Fastners - Widths across flats of hexagon products
77 Connections with waisted stud - Tape classification [GB]
GB /T 13807.1 - 2008 		Connections with waisted stud - Tape classification
78 Fasteners - Clearanc holes for bolts and screws [GB]
GB 5277 - 1985 		Fasteners - Clearanc holes for bolts and screws
79 Drill diameter for use prior to tapping screw threads [GB]
GB /T 20330 - 2006 		Drill diameter for use prior to tapping screw threads
80 Square and rectangular keyways [GB]
GB /T 1095 - 2003 		Square and rectangular keyways
81 Taper keys of keyways [GB]
GB /T 1563 - 2017 		Taper keys of keyways
82 Hexagon lobuar for fasteners - Type E [GB]
GB 6189 - 1986 		Hexagon lobuar for fasteners - Type E
83 Center holes [GB]
GB /T 145 - 2001 		Center holes
84 Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD） [GB]
GB /T 2 - 2016 		Fasteners-Ends of parts with external thread（ISO 4753:2011, MOD）
85 Clearance holes for rivets [GB]
GB 152.1 - 1988 		Clearance holes for rivets