①,The hose clamps do not need to correspond to the illustration; only the specified dimensions are to be observed. ③,Hexagon screw according to DIN EN ISO 4017, but with slot according to DIN 962. ④,Hexagon screw according to DIN EN ISO 4017. ⑤,a)Material abbreviation W1: Screw: Strength class 8.8 by DIN EN ISO 898-1;Belt, bridge and clamping jaws :Steel with tensile strength of at least 400MPa (type at the manufacturer's choice) b)Material abbreviation W3: Screw: Steel group A2-70 according to DIN EN ISO 3506-1 ; Belt, bridge and clamping jaws :Steel of material number 1.4016 according to DIN EN 10088-2 or equivalent corrosion-resistant steel (variety at the manufacturer's choice) c)Material abbreviation W4: Screw: Steel group A2-70 according to DIN EN ISO 3506-1 ; Belt, bridge and clamping jaws :Steel of material number 1.4301 according to DIN EN 10088-2 or equivalent corrosion-resistant steel (variety at the manufacturer's choice) d)Material abbreviation W5: Screw: Steel group A2-70 according to DIN EN ISO 3506-1 ; Belt, bridge and clamping jaws :Steel of material number 1.4401, 1.4436, 1.4571 according to DIN EN 10088-2 or equivalent corrosion-resistant steel, suitable for seawater, difficult to magnetize (variety at the manufacturer's choice) e)Other materials by agreement; instead of the abbreviation, the material number must be stated |